Bunting Tutorial & pattern kit
by hungryhippie
For these bunting flags, you can use any fabrics you like, even scraps. Cotton is easiest for first time sewers, but almost any material can be used. I’ve cut up old shirts and jeans to make buntings as well. Eco friendly and easy-just what I like!
Step 1: Use the included pattern to cut out the triangle shapes from poster board or card stock. This way you can keep it forever, using it over and over again.
Step 2: Cut all triangles at once. You will need two pieces (front and back) for each triangle. For example, nine flags would be eighteen fabric triangles.
Step 3: Pin the two fabric triangles right sides together and sew the sides at a 1 /4″ seam. Leave the top open for turning later.
Step 4: Turn each triangle right sides out again and press. You may have to use a pointy thing to get the end nice and crisp.
I used a knitting needle to help me get the point pushed out.
Step 5: Trim all corners and threads to clean it up before we finish off.
Step 6: Insert into the folded center of double fold bias tape, and press. Pin each corner into the bias tape, for security while you sew the edge closed.
*The bias tape doesn’t have to be cut on the bias for this project. I now make my tape along the selvedge edge of the fabric with the Simplicity Tape Maker machine to help me iron it all out smoothly and neatly in just a few minutes.
Step 7: Sew the entire open edge from end to end, closing the bias tape. Check to be sure you are catching both front and back while you sew. It’s not difficult, just take a second and check yourself.
Trim the ends of the bias tape with pinking shears and hang it up!
Thank you for your support! Find me online here:Facebook/pages/hungryhippie or my blog: 1hungryhippie.blogspot.com
